Self Levelling Primer

Features

Benefits

• Reduced preparation time for new panels.
• Removes the need to sand the electrocoat substrate on new panels.
• Excellent hold-out when topcoated (as good as that achieved over flattable primers).
• Can be used in a Holding Primer mode.
• No reaction over sensitive substrates.
• Good multi-substrate capability - can be used directly on all common substrates including aluminium and galvanised steel for rub-through areas.
• Ideal primer for plastics.

• 40% reduction in process times.
• Improved workshop efficiency.
• Higher through-put.
• Reduction in process times.
• Improved workshop efficiency.
• Maintains the corrosion protection of the e-coat.
• No compromise in quality.
• Can increase through-put in busy spraybooths.
• Increased workshop efficiency and profitability.
• Reduce the need for re-work.
• Improved workshop efficiency.
• Removes the need for Etch Primer over rub-through   and small repair areas, saving time and costs.
• Simple to apply to complex shapes, without any overspray build up, sagging or mapping of sensitive areas.

Mixing by weight

P565-560X

P210-8430/844

P852-1670

2 parts

1 part

0.5 parts

Potlife at 20°C

60 min.

16 - 18 secs DIN4 / 20°c

Spraygun Size

1.2-1.3 mm.

Number of Coats

1 full single coat or 1 light + 1 full

 For additional information, consult technical data sheet H5930V.